| 1. | Thermal flow meter
热流量计 |
| 2. | 15 . 04 test method for thermal flow and cure properties of thermosetting plastics by torque rheometer
转矩流变仪测定热固性塑料的热流量和固化特性的方法 |
| 3. | Standard test method for thermal flow , cure , and behavior properties of pourable thermosetting materials by torque rheometer
用转矩流变仪测试可浇注的热固材料的热流性固化性及性能特性的标准试验方法 |
| 4. | According to heat transfer and hydrodynamics , the thermal flow dynamics and the thermal resistance microchannel heatsink are analyzed
根据传热学和流体力学理论，本论文对微通道热沉进行了热流模型分析，理论推导了微通道热沉的热阻。 |
| 5. | As a tool for measuring the whole instantaneous flow field without contacting the flow , piv and related image measurement techniques have been extensively applied to automated measurements of multiphase flows , turbulence and thermal flows with reliable accuracy
作为一种全流场无接触瞬时测量的工具， piv和相关的图像测量技术已经广泛地应用于多相流、紊流和热流的自动测量，而且具有可靠的精度。 |
| 6. | The homogeneous state control equations with mechanic electric heat coupling effect of piezoelectric thermoelastic open shell is derived by uniting the static equilibrium equations , the charge displacement equilibrium equations and thermal flow equilibrium equations
依据此增维的本构关系，结合压电热弹性体平衡方程和热平衡方程，成功地导出了压电热弹性体层合开口壳机、电、热耦合问题的齐次状态方程。 |
| 7. | In this thesis , the 2 dimensional ( 2d ) and 3 dimensional ( 3d ) models of the sls of 316 stainless steel powder were constructed . apdl ( ansys parameter design language ) was used to control the density of thermal flow , velocity and path of scanning
本文建立了316不锈钢粉末激光烧结的二维、三维模型;运用apdl语言控制热源的热流密度、移动速度以及扫描轨迹;研究了单层多道和单道多层烧结的温度场和应力场。 |
| 8. | On base of the exhaust heat of 6160a - 12 and 6160a - 13 vessel diesel engine , parameters of test plat such as thermal flow , export temperature and pressure are definite through the calculation of design parameter in method of combined theory and experience data
以6160a - 12和6160a - 13型船用柴油机尾气参数为设计基础，通过理论和经验数据相结合的方法进行设计参数计算，确定了模拟实验台热流量、出口温度及压力等参数。 |
| 9. | Based on the exhaust heat data of the iurbine ( 6160a - 12 ) and the micro gas turbine produced in japan , parameters of test - bed such as deferent thermal flow temperature and pressure are defined by the calculation of design parameter in method of combined theory and experience data
以柴油机( 6160a - 12 )和日本的微型燃气涡轮机尾气参数为设计基础，通过理论和经验数据相结合的方法进行设计参数计算，确定了模拟实验台热流量、出口温度及压力等参数。 |
| 10. | Abstract : the heating process of the round steel billet in the annular furnace was researched by the method of the thermal state simulating experiment . the test was carried out synchronisticly at the site . according to the results of the experiment and actual measurement , the mathematical pattern was connected , and the amended parameters of the thermal flow were given out correctively
文摘:应用热态模型试验的方法对环形加热炉圆钢坯加热过程进行了研究.在此基础上，进行了现场测试，根据实验和实测结果，对数学模型进行了修正，给出了不同条件下的热流修正系数 |
